TM 1-1520-238-23
3-260
3.65.
SINGLE DISK BRAKE, FRICTION LINING, AND BRAKE DISK REMOVAL/INSTALLATION
(PARKER-HANNIFIN) – continued
NOTE
This task typical for left and/or right main
wheel brakes.
3.65.3. Removal
a. Remove hose nut (1) from boss nipple (2)
installed in cylinder assembly (3).
(1) Hold nipple (2). Remove hose nut (1).
(2) Use pail to catch hydraulic fluid spills.
NOTE
If brake disk is to be replaced, perform
steps b. thru d. If friction lining is to be
replaced, perform steps b., c., e., and
g.
When recessed washers are used,
eight washers shall be removed with
bolt. When flat washers are used
(Goodyear only), 16 flat washers shall
be removed with bolt and nut.
b. Remove eight shear bolts (4) from trailing arm
flange (5).
(1) Hold eight bolts (4). Remove eight self-lock-
ing nuts (6) and washers (7).
(2) Remove eight bolts (4) and recessed wash-
ers (8).
GO TO NEXT PAGE
M04-3422-1
2
3
M04,3422
,2
1
8
4
7
6
5
M04-3422-3
