TM 1-1520-238-23
3-266
Change 4
3.65.
SINGLE DISK BRAKE, FRICTION LINING, AND BRAKE DISK REMOVAL/INSTALLATION
(PARKER-HANNIFIN) – continued
c. Install three piston insulators (17.1) on cylin-
der assembly (3).
d. Install new lining (17) on cylinder assembly
(3).
(1) Aline three lining (17) locating pins with holes
in three pistons (20).
(2) Install new lining (17) on cylinder assembly
(3).
e. Inspect (QA).
f. Position and support disk (9) on lining (17) of
plate (10).
g. Lubricate eight washers (13), four washers
(14), and four nuts (12). Use antiseize
compound (item 27, App F).
h. Install four bolts (11) and washers (14)
through plate (10).
NOTE
Minimum of 1.5 exposed threads to be
maintained between bolt chamfer and top
of nut. Removal of one washer is per-
mitted to maintain 1.5 threads provided
that bolt shank out does not occur.
i. Install cylinder assembly (3) on four bolts (11).
Torque nuts (12) to 300 INCH-POUNDS.
(1) Aline and install cylinder assembly (3) on four
bolts (11).
(2) Hold four bolts (11). Install eight washers (13)
and four nuts (12). Torque nuts (12) to 300
INCH-POUNDS. Use torque wrench.
j. Position disk (9) on flange (5) with center of
outer trailing arm (26) alined with center of
cylinder assembly (3).
GO TO NEXT PAGE
3
M04-3422-18A
17
17.1
9
17
10
M04-3422-12
9
12
13
14
11
3
M04-3422-13
9
5
26
3
3
ALINEMENT
VIEW
M04-3422-14
