TM 1-1520-238-23
3-285
3.68.
MAIN LANDING GEAR WHEEL BRAKE, HOSE (NONMETALLIC), TUBE, AND CLAMP
REMOVAL/INSTALLATION – continued
3.68.6. Installation
CAUTION
To prevent damage to tube during kneel-
ing/erecting, ensure clamps, brackets,
tube, and hoses do not protrude into area
between fuselage and trailing arm.
NOTE
Ensure to attach bonding jumper under
clamp.
a. Install clamp (28), bracket (29), and nipple (17)
on trailing arm (18).
(1) Install clamp (28) on trailing arm (18) 13.50
INCHES from center of arm pivot point (32).
(2) Install bracket (29) under clamp (28).
(3) Install nut (31) on clamp (28). Do not tighten
nut (31).
(4) Install nipple (17) on bracket (29).
(5) Hold nipple (17). Install nut (30).
b. Install clamp (26) and bracket (14) on trailing
arm (18).
(1) Install clamp (26) on trailing arm (18) 25.75
INCHES from center of trailing arm pivot point
(32).
(2) Install bracket (14) under clamp (26).
(3) Install nut (27) on clamp (26). Do not tighten
nut (27).
GO TO NEXT PAGE
13.50 IN
28
29
18
32
31
17
30
M04-3432-12
25.75 IN
26
14
18
32
27
M04-3432-13
