TM 1-1520-238-23
3-286
3.68.
MAIN LANDING GEAR WHEEL BRAKE, HOSE (NONMETALLIC), TUBE, AND CLAMP
REMOVAL/INSTALLATION – continued
c. Install clamp (22), bracket (23), and nipple (10)
on trailing arm (18).
(1) Install clamp (22) on trailing arm (18) 35.75
INCHES from center of pivot point (32).
(2) Install bracket (23) under clamp (22).
(3) Install nut (25) on clamp (22). Do not tighten
nut (25).
(4) Install nipple (10) on bracket (23).
(5) Hold nipple (10). Install nut (24).
d. Install clamp (20) and bracket (6 ) on trailing
arm (18).
(1) Install clamp (20) on trailing arm (18) 45.25
INCHES from center of pivot point (32).
(2) Install bracket (6) under clamp (20).
(3) Install nut (21) on clamp (20). Do not tighten
nut (21).
e. Install tube (9) on nipple (17) and trailing arm
(18).
(1) Install tube (9) on nipple (17).
(2) Hold nipple (17). Install nut (19).
f. Install clamp (13) on bracket (14) and tube (9).
(1) Install clamp (13) on tube (9).
(2) Install screw (16) through clamp (13) and
bracket (14).
(3) Install nut (15).
GO TO NEXT PAGE
M04-3432-14
22
23
32
25
18
35.75 IN
24
10
M04-3432-15
20
6
32
21
45.25 IN
18
17
19
18
9
M04-3432-16
15
13
16
14
9
M04-3432-17
