TM 1-1520-238-23
Change 4
2-93
2.34.
ELECTROMAGNETIC CONDUCTIVE COATING APPLICATION
2.34.1. Description
This task covers:
Preparation. Application. Touch-Up. Repair.
2.34.2. Initial Setup
Tools:
Aircraft mechanic’s tool kit (item 376, App H)
Light duty laboratory apron (item 27, App H)
Spray gun paint cup (item 102, App H)
Chemical protective gloves (item 154, App H)
Heat protective gloves (item 155, App H)
Electric gun type heater (item 163, App H)
1 1/4-inch blade putty knife (item 199, App H)
Multimeter (item 215, App H)
Adjustable air filtering respirator (item 262, App H)
0.0 - 10.0-pound weighing scale (item 272, App H)
Paint spray gun (item 339, App H)
Materials/Parts:
Brush (item 36, App F)
Cloth (item 48, App F)
Cloth (item 52, App F)
Corrosion resistant coating (item 65, App F)
Corrosion resistant coating (item 66, App F)
Epoxy primer coating kit (item 78, App F)
Depressor (item 70, App F)
Isopropyl alcohol (item 106, App F)
Methyl ethyl ketone (item 124, App F)
Primer coating (item 147, App F)
Tape (item 205, App F)
Personnel Required:
67R
Attack Helicopter Repairer
67R3F
Attack Helicopter Repairer/Technical
Inspector
References:
TM 55-1500-345-23
TM 55-1500-323-24
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
2.2
Fairings, panels, doors, and covers re-
moved/opened as required
NOTE
This task is typical for preparation and application of EMI conductive coating material.
EMI conductive coating material is being used to replace EMI tape on structural, door, and fairing
surfaces. Tailboom fairing interface surfaces are not included.
EMI conductive coating may be applied over existing primer coating on composite and metallic
panels, providing that the primer is sufficiently abraded and cleaned for proper conductive coating
adhesion.
GO TO NEXT PAGE
