TM 1-1520-238-23
2-105
2.37.
GUN AND AMMO SUPPORT AFT MOUNT PADS SLEEVE BUSHING REPLACEMENT
(AVIM) – continued
2.37.3. Removal
a. Remove and discard self-locking barrel nut (1)
and nut retainer (2) from fuselage support (3).
WARNING
Do not place heater near flammable
material or allow heater to contact
skin: severe burns can result. Wear
protective equipment. If injury occurs,
seek medical aid.
CAUTION
Do not heat bushing bore area over 200
F (98 C) or damage may result.
b. Remove sleeve bushing (4) from forward fuse-
lage gun and ammo support (3).
(1) Heat support (3) bore area. Use heater.
(2) Remove and discard bushing (4) from sup-
port (3). Use driftpin and mallet.
GO TO NEXT PAGE
2
1
M04-3954-4
3
M04-3954-2
3
4
