TM 1-1520-238-23
2-109
2.38.
GUN AND AMMO SUPPORT FORWARD MOUNT PADS SLEEVE BUSHING REPLACEMENT
(AVIM) continued
2.38.3. Removal
WARNING
Do not place heater near flammable
material or allow heater to contact
skin: severe burns can result. Wear
protective equipment. If injury occurs,
seek medical aid.
CAUTION
Do not heat bushing bore area over 200
F (98 C) or damage may result.
a. Remove self-locking nutplate (1) and plate
spacer (2) from forward fuselage gun and
ammo support (3).
(1) Remove and discard two blind rivets (4) from
nutplate (1) (TM 1-1500-204-23).
(2) Remove nutplate (1) and spacer (2).
b. Remove sleeve bushing (5) from support (3).
(1) Heat support (3) bore area. Use heater.
(2) Remove and discard bushing (5) from sup-
port (3). Use driftpin and mallet.
GO TO NEXT PAGE
4
4
1
2
3
5
M04-4554-2