TM 1-1520-238-23
Change 1
2-125
2.44.
ACCESS DOOR ADJUSTABLE TENSION THUMB LATCH AND HOOK
REPLACEMENT/ADJUSTMENT continued
2.44.5. Inspection
a. Check mounting surface for cracks or dam-
age (para 2.11).
2.44.6. Installation
NOTE
If EMI gasket is installed and mismatch
exists between latch and hook, install
shim if required.
a. Install new latch (1) and hook (2) on airframe
(3).
(1) Position new latch (1) on airframe (3).
(2) Install two rivets (4) through latch (1) and air-
frame (3) (TM 1-1500-204-23).
(3) Position new hook (2) and shim (D-141) (5), if
required, on door (6). Use shim (Figure
D-141, App D).
(4) Install two rivets (4) through hook (2), shim
(5)
if
required,
and
door
(6)
(TM 1-1500-204-23).
2.44.7. Adjustment
a. Adjust latch (1) on airframe (3).
(1) Disengage latch (1) from door hook (2).
(2) Turn drawhook (7) clockwise to increase ten-
sion or counterclockwise to decrease tension.
b. Inspect (QA).
END OF TASK
M04-1501-2A
3
1
4
6
5
2
4
M04-1501-3A
1
7
2