TM 1-1520-238-23
2-284
Change 1
2.82.
AMMUNITION MAGAZINE STRUT AND EYE BOLT REMOVAL/INSTALLATION – continued
b. Remove eye bolt (7) from fitting (2).
(1) Hold shoulder bolt (8). Remove nut (9) and
washer (10).
(2) Pull bolt (8) half way out of fitting (2).
(3) Remove spring tension washer (11), washer
(12), laminated washer (13), and eye bolt (7)
from fitting (2).
(4) Remove bolt (8) and washer (14) from fitting
(2).
2.82.4. Cleaning
a. Clean adhesive residue in fitting slot (para
1.47).
b. Wipe attaching areas of strut and eye bolt with
a clean rag.
2.82.5. Inspection
a. Check strut and fittings for corrosion (para
1.49).
b. Check mounting surface of strut and eyebolt
for damage (para 2.12).
c. Check fitting and eye bolt for hole size.
(1) If hole size is greater than 0.319 INCH, re-
place.
d. Check strut for hole size.
(1) If hole size is greater than 0.319 INCH, re-
place.
GO TO NEXT PAGE
M04-2652-3A
2
8
9
7
11
12
13
14
10
TYPICAL 4 PLACES
