TM 1-1520-238-23
2-398
Change 4
2.110.
VERTICAL STABILIZER TIP FAIRINGS T545A AND T545 REMOVAL/INSTALLATION – continued
2.110.3. Removal
a. Remove clamp (1) from vertical stabilizer tip
fairing T545 (2). Use maintenance platform.
(1) Remove screw (3) and washer (4) from clamp
(1).
(2) Remove clamp (1).
b. Remove clamp (5) from fairing (2).
(1) Remove screw (6), washer (7), clamp (5),
and spacer (8).
NOTE
Identify each wire and terminal during re-
moval to ensure proper placement during
installation.
c. Identify and depin four wires (9) from four
splices (10) (TM 55-1500-323-24).
d. Remove tip fairings T545A (11) and T545 (2)
from stabilizer (12).
(1) Remove 6 screws (13) and washers (14) from
cap assembly (15).
(2) Slide cap assembly (15) upward to allow
clearance.
(3) Remove 17 screws (16) and washers (17)
from fairings (2) and (11).
(4) Pull fairing (11) forward and remove from sta-
bilizer (12).
(5) Remove fairing (2) from stabilizer (12).
GO TO NEXT PAGE
M04-2188-10B
3
2
1
6
7
8
5
4
10
9
10
M04-2188-8B
9
13
15
16
17
2
M04-2188-4C
14
12
11
ADD
