TM 1-1520-238-23
Change 4
2-559
2.151.
ENGINE NACELLE STRUT ASSEMBLY REMOVAL/INSTALLATION – continued
2.151.3. Removal
a. Remove engine nacelle strut assembly (1)
from engine nacelle (2).
(1) Hold two shear bolts (3). Remove nuts (4)
and washers (5).
(2) Remove two bolts (3) and washers (6) from
strut (1).
(3) Remove strut (1) from nacelle (2).
2.151.4. Cleaning
a. Wipe strut attachment area with a clean rag.
2.151.5. Inspection
a. Check strut attachment area for corrosion
(para 1.49).
b. Check strut attachment area for cracks
(TM 1-1500-204-23).
2.151.6. Repair
a. Repair strut (1) by replacing end fitting (7).
(1) Remove rivets (8) and end fitting (7) from
strut (1) (TM 1-1500-204-23).
(2) Clean strut (1) fitting area. Use methyl ethyl
ketone (item 124, App F) and cloth (item 52,
App F) (para 1.47).
(3) Pre-fit end fitting (7) to strut (1).
(4) Apply liquid shim to end fitting (7). Use brush
(item 34, App F) and shim (item 181, App F).
(5) Install rivets (8) on end fitting (7) and strut (1)
(TM 1-1500-204-23).
GO TO NEXT PAGE
M04-4126-2
1
5
4
2
6
3
1
2
3
4
5
6
M04-4126-3
8
1
7
7
8
