TM 1-1520-238-23
Change 2
2-658.5
2.181B. CPG LEFT HAND OR RIGHT HAND ARMORED SIDE PANEL
REMOVAL/INSTALLATION – continued
2.181B.3. Removal
a. Remove bracket (1) from airframe (2). (Left side
only).
(1) Remove seven screws (3) and washers (4).
(2) Remove coating from faying surface of brack-
et (1) and airframe (2).
(3) Remove bracket (1).
NOTE
Remove clamps as required to position
wires for access.
b. Remove side panel (5) from airframe (2).
(1) Remove eight nuts (6) and washers (7).
(2) Remove eight bolts (8) and one spacer (9).
(3) Remove panel (5) from airframe (2).
c. Remove four clips (10) from panel (5).
(1) Remove eight bolts (11).
(2) Remove four clips (10).
2.181B.4. Cleaning
a. Wipe removed and attaching parts and sur-
faces with a clean rag.
b. Remove coating from bracket and attaching
area (para 1.47).
2.181B.5. Inspection
a. Check panel for cracks. None allowed.
b. Check removed and attaching parts for corro-
sion (para 1.49).
c. Check seal for damage and/or wear. Replace
seal if necessary (para 2.181D).
d. Check for loose or missing hardware. None
allowed.
GO TO NEXT PAGE
M04-5095-4
4
3
1
2
LEFT HAND SIDE SHOWN
M04-5095-2
5
6
7
8
9
2
11
11
10
LEFT SIDE SHOWN
