TM 1-1520-238-23
2-658.10
Change 2
2.181C. PILOT LEFT HAND UPPER ARMORED SIDE PANEL REMOVAL/INSTALLATION – continued
2.181C.6. Installation
NOTE
Do not tighten four aft bolts when instal-
ling clips on new panel.
a. Install two clips (6) and clip (11) on panel (2).
(1) Position two clips (6) and clip (11) on panel
(2).
(2) Install six bolts (12).
b. Install channel (1) on panel (2).
(1) Position channel (1) on two clips (6).
(2) Install four bolts (9) and washers (10) through
clips (6) and channel (1).
(3) Install four washers (8) and nuts (7).
c. Install panel (2) on airframe (3).
(1) Position panel (2) on airframe.
(2) Install nine washers (5) and screws (4).
d. Tighten four bolts (12) on two clips (6).
NOTE
Reposition wires and install clamps as
required.
e. Inspect (QA).
f. Install
pilot
missile
control
panel
(TM 9-1427-475-20).
g. Install stores jettison power distribution panel
(TM 9-1090-208-23).
h. Install
rocket
control
panel
(TM 9-1090-208-23).
i. Install ECS panel (para 13.34).
j. Install ASE panel (para 11.191).
k. Install pilot electrical power panel (para 9.33).
l. Install pilot power quadrant (para 4.166).
m. Install pilot left console panels PL3, PL5, and
PL7 (para 2.2).
n. Inspect (QA).
END OF TASK
5
5
1
3
M04-5096-3
2
5
4
4
9
10
8
7
4
5
6
11
12
6
