TM 1-1520-238-23
2-701/(2-702 blank)
2.198.
TAILBOOM UTILITY LOW LEVEL SHUTOFF VALVE ARMOR PLATE
REMOVAL/INSTALLATION – continued
2.198.4. Cleaning
a. Clean sealing compound from removed and
attaching parts (para 1.47).
b. Wipe removed and attaching parts with a
clean rag.
2.198.5. Inspection
a. Check plate for cracks and damage. None al-
lowed.
b. Check removed and attaching parts for corro-
sion (para 1.49).
2.198.6. Installation
a. Install armor plate (1) on deck (2).
(1) Position plate (1) on deck (2).
(2) Install two screws (7) and washers (8) on
plate (1).
(3) Install two screws (3) through washers (4)
and channels (5) and (6) into plate (1).
b. Apply sealing compound around edge of plate
(1) where it contacts aft deck (2). Use sealing
compound (item 174, App F) and brush (item 34,
App F).
c. Inspect (QA).
d. Install utility low level shutoff valve (para
7.108).
END OF TASK
5
4
1
2
6
3
7
4
8
M04-4670-3
