TM 1-1520-238-23
2-696
2.196.
TAILBOOM UTILITY HYDRAULIC TUBES ARMOR CHANNEL ASSEMBLIES
REMOVAL/INSTALLATION – continued
2.196.6. Installation
NOTE
Some channel stack-ups will have a
washer or shim between the grommet
and airframe.
a. Install channel (3) on airframe (11).
(1) Position channel (3) on airframe (11).
(2) Install screws (12) through shims (13), chan-
nel (3), and grommets (14) into airframe (11).
(3) Install screw (15) through washer (16), and
channel (3) into armor plate (17) (if required).
b. Install hydraulic tubes (1) and (2) on channel
(3).
(1) Install screw (8) through washer (9) and
clamp (10) into channel (3).
(2) Install screw (4) through washer (5), clamp
(6), and spacer (7) into channel (3).
NOTE
Sealing compound is required only on the
five forward grommets that contact aft
deck.
c. Apply sealing compound to grommets (14).
Use sealing compound (item 174, App F) and
brush (item 34, App F).
GO TO NEXT PAGE
3
13
14
16
15
M04-4668-4
12
17
11
M04-4668-5
1
3
4
5
9
10
2
6
7
8
