TM 1-1520-238-23
Change 7
3-23
3.7.
MAIN LANDING GEAR TIRE REMOVAL/INSTALLATION (GOODYEAR) – continued
3.7.5. Inspection
a. Check wheels for dents, or nicks.
(TM 1-1500-204-23).
b. Check wheels for galling and discoloration
caused by overheating. None allowed.
c. Check wheels for corrosion (para 1.49).
d. Check tire for cuts, splits, wear, flat spots, ply
separation, exposed cord, and contamination
(TM 55-2620-200-24).
e. Check wheels for cracks.
(1) If cracks are suspected, perform nondestruc-
tive inspection (TM 1-1520-264-23).
3.7.6. Installation
a. Install new packing (9) on wheel (2).
(1) Lubricate packing (9). Use grease (item 87,
App F).
(2) Install packing (9) on shoulder of outboard
wheel (2).
b. Install wheel (2) in tire (4).
(1) Aline dot (10) on tire (4) with pneumatic tire
valve (11).
c. Install wheel (3) in tire (4).
(1) Aline bolt holes in wheels (2) and (3).
GO TO NEXT PAGE
3
2
11
10
9
4
M04-049-3
