TM 1-1520-238-23
3-19
3.6.
MAIN LANDING GEAR WHEEL AND TIRE REMOVAL/INSTALLATION – continued
3.6.6. Installation
a. Install wheel (2) on axle (3).
(1) Release parking brake (para 1.61).
(2) Push brake disk (9) inboard to retract brake
pistons.
(3) Spin brake disk (9) to ensure no brake drag
exists. If brake drag exists, replace brake
(para 3.65 or 3.66).
(4) Coat spacer (8) with grease (item 87, App F).
(5) Slide spacer (8) on axle (3) with beveled side
toward strut.
NOTE
The nine-bolt wheel has a bearing retain-
er which holds the bearing in place while
wheel is being installed.
(6) Position wheel (2) on axle (3). Aline brake
disk grooves in wheel with lugs on brake disk
(9). To engage brake disk (9), slide wheel
inboard.
(7) Install lock ring (7) and axle nut (1) on axle
(3).
GO TO NEXT PAGE
3
2
M04-0047-3
7
1
9
8
