TM 1-1520-238-23
Change 6
3-38.3
3.11A.
MAIN LANDING GEAR WHEEL REPAIR (PARKER HANNIFIN) (AVIM) – continued
3.11A.3. Removal
NOTE
This step is typical for both inboard and outboard main landing gear wheels.
a. Remove main landing gear wheel name plate (1) from main landing gear wheels (2).
(1) Record all data found on existing name plate (1).
(2) Remove two drive screws (3) from name plate (1) and wheels (2).
(3) Peel up corner of plate (1). Use putty knife.
(4) Remove and discard plate (1) from main landing gear wheels (2).
2
1
3
M04-5198-1
b. Remove paint from wheels (2). Use remover (item 149, App F).
c. Remove paint residue from wheels (2). Use cloth (item 52, App F).
d. Remove main landing gear wheel tapered roller cups (TM 55-1500-322-24).
GO TO NEXT PAGE
