TM 1-1520-238-23
3-38.8
Change 6
3.11A.
MAIN LANDING GEAR WHEEL REPAIR (PARKER HANNIFIN) (AVIM) – continued
NOTE
This step typical for both inboard and outboard main landing gear wheels.
c. Install new name plate (1) on main landing gear wheels (2).
(1) Transcribe recorded data from old plate (1) to new plate (1). Use die set.
(2) Lightly abrade wheels (2) in same location as old plate (1). Use cloth (item 48, App F).
(3) Apply a smooth continuous coat of adhesive to mounting surface of plate (1). Use brush (item 34, App F)
and adhesive (item 2, App F).
(4) Install plate (1) on wheel (2) in same location as old plate (1).
(5) Install two drive screws (3) coated with adhesive (item 2, App F) through plate (1) and wheel (2).
(TM 1-1500-204-23).
2
1
3
M04-5198-3
GO TO NEXT PAGE
