TM 1-1520-238-23
3-45
3.14.
MAIN LANDING GEAR WHEEL TAPERED CONE AND ROLLERS REMOVAL/INSTALLATION
(EIGHT-BOLTS) – continued
3.14.3. Removal
a. Remove special seal (1) and tapered cone and
roller (2) from tapered roller cup (3) of wheel
(4).
b. Remove seal (5) and tapered cone and roller
(6) from tapered roller cup (7) of wheel (4).
3.14.4. Cleaning
CAUTION
Do not spin rollers with compressed air.
This could damage unlubricated rollers.
a. Clean rollers and removed and attaching
parts (para 1.47).
3.14.5. Inspection
a. Check rollers for wear, fretting, and loose-
ness. None allowed.
b. Check tire for cuts, splits, wear, flat spots, ply
separation, exposed cord, and contamination
(TM 55-2620-200-24).
GO TO NEXT PAGE
2
3
7
6
1
5
M04-3659-1
4
