TM 1-1520-238-23
3-46
3.14.
MAIN LANDING GEAR WHEEL TAPERED CONE AND ROLLERS REMOVAL/INSTALLATION
(EIGHT-BOLTS) continued
3.14.6. Installation
a. Grease rollers (2) and (6) (para 3.15).
b. Coat cups (3) and (7) and new seals (1) and (5)
with grease. Use grease (item 87, App F).
c. Install roller (6) and seal (5) in cup (7) of wheel
(4).
(1) Position roller (6) in cup (7).
(2) Install seal (5) in cup (7). Ensure edge of seal
(5) is facing roller (6).
(3) Press seal (5) in place with hand pressure.
d. Install roller (2) and seal (1) in cup (3) of wheel
(4).
(1) Position roller (2) in cup (3).
(2) Install seal (1) in cup (3). Ensure edge of seal
(1) is facing roller (2).
(3) Press seal (1) in place with hand pressure.
e. Inspect (QA).
f. Install main landing gear wheel and tire (para
3.6).
END OF TASK
4
2
3
7
6
1
5
M04-3659-2