TM 1-1520-238-23
3-89
3.24.
MAIN LANDING GEAR SHOCK STRUT UPPER SEAL ASSEMBLY REPLACEMENT
(AVIM) – continued
(5) Back off ring (1) until lock (6) will aline with
nearest slot in ring (1) and strut boss (13).
c. Install lock (6) on ring (1). Torque two nuts (4) to
20 INCH-POUNDS.
(1) Coat surfaces of lock (6) with primer. Use
epoxy primer coating kit (item 78, App F) and
brush (item 34, App F). Install wet.
(2) Install lock (6) on ring (1).
(3) Coat surfaces of two screws (3), washers (5),
and nuts (4) with primer. Use epoxy primer
coating kit (item 78, App F) and brush
(item 34, App F). Install wet.
(4) Install two screws (3), washers (5), and nuts
(4) in alined holes in lock (6) and strut boss
(13).
(5) Torque two nuts (4) to 20 INCH-POUNDS.
Use torque wrench.
(6) Lockwire two screws (3) to bleed plug (14).
Use wire (item 226, App F).
d. Inspect (QA).
e. Install bleeder plug (para 3.21).
f. Install pneumatic valve (para 3.19).
g. Install rod end (para 3.23).
END OF TASK
M04-2578-3
4
6
13
1
5
3
14
