TM 1-1520-238-23
3-93
3.26.
MAIN LANDING GEAR CABLE CUTTER REMOVAL/INSTALLATION continued
3.26.3. Removal
a. Remove rim clenching clamp halves (1) and
(2) from trailing arm assembly (3).
(1) Clean sealant from clamp halves (1) and (2)
(para 1.47).
(2) Remove two self-locking nuts (4) and wash-
ers (5).
(3) Remove two shear bolts (6) and washers (7).
(4) Remove two self-locking nuts (8) and wash-
ers (9).
(5) Remove two shear bolts (10) and washers
(11).
(6) Remove clamp halves (1) and (2) from trailing
arm (3).
(7) Remove tape from clamp halves (1) and (2).
b. Remove cable cutter (12) from trailing arm (3).
(1) Remove cotter pin (13) from nut (14).
(2) Remove nut (14) and washer (15).
(3) Remove shear bolt (16) and washer (17).
(4) Remove cutter (12) and spacer (18) from
trailing arm (3).
GO TO NEXT PAGE
4
6
12
7
5
2
11
10
3
9
8
1
M04-3533-2
M04-3533-3
3
12
17
16
14
15
18
13