TM 1-1520-238-23
5-286
Change 5
5.67.
TAIL ROTOR FORK AND TEETER STOP DISASSEMBLY/ASSEMBLY (AVIM)
5.67.1. Description
This task covers:
Disassembly. Cleaning. Inspection. Assembly
5.67.2. Initial Setup
Tools:
Aircraft maintenance tool kit (item 372, App H)
Light duty laboratory apron (item 27, App H)
Aircraft maintenance fixture (item 132, App H)
Chemical protective gloves (item 154, App H)
Heat protective gloves (item 155, App H)
Electric gun type heater (item 163, App H)
1 3/4 & 2 3/4-inch rubber mallet (item 213, App H)
Adjustable air filtering respirator (item 262, App H)
Materials/Parts:
Adhesive (item 8, App F)
Brush (item 34, App F)
Cloth (item 50, App F)
Cloth (item 51, App F)
Cloth (item 52, App F)
Distilled water (item 73, App F)
Cotton gloves (item 82, App F)
Isopropyl alcohol (item 106, App F)
Fishing line (item 110, App F)
Petrolatum (item 138, App F)
Personnel Required:
68D
Aircraft Powertrain Repairer/NDI
67R3F
Attack Helicopter Repairer/Technical
Inspector
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
5.57A
Tail rotor hubs removed
WARNING
FLIGHT SAFETY PART
The tail rotor fork is a flight safety part. Failure to follow maintenance instructions may result
in serious injury or death of crewmembers and/or serious damage to the helicopter.
GO TO NEXT PAGE
