TM 1-1520-238-23
Change 5
4-101
4.33.
ENGINE BUILDUP NO. 1 AND NO. 2 ENGINE OIL CHIP COLLECTOR INSTALLATION continued
4.33.3. Installation
a. Install collector (2) on oil sump (3).
(1) Install washer (5) on sump (3).
(a) Apply sealant to washer (5) on side oppo-
site countersink. Use adhesive (item 14,
App F).
(b) With countersink facing out, aline hole in
washer (5) with mounting hole on sump
(3). Press in place. Wipe excess sealant
with a clean dry rag.
(2) Install new packing (4) on collector (2).
(a) Lubricate packing (4). Use lubricating oil
(item 119, App F).
(b) Install packing (4) in collector groove (6).
b. Torque collector (2) to 60 INCH-POUNDS. Use
crowfoot and torque wrench.
NOTE
Probe is properly installed when knurl tips
and hex points aline.
c. Install probe (1) in collector (2).
(1) Push in probe and turn clockwise.
d. Inspect (QA).
GO TO NEXT PARAGRAPH
2
M04-5064-2
3
5
4
2
M04-5064-3
1
4
3
6
2