TM 1-1520-238-23
4-211
4.66.
NO. 1 OR NO. 2 ENGINE LOUVER DISASSEMBLY/ASSEMBLY (AVIM) – continued
d. Remove louver endplates (22) and (23) from
channels (24) and (25).
(1) Remove four nutplates (26) from endplates
(22)
and
(23)
and
channel
(24)
(TM 1-1500-204-23).
(2) Remove four nutplates (27) from endplates
(22)
and
(23)
and
channel
(25)
(TM 1-1500-204-23).
(3) Remove rivets (28) from endplates (22) and
(23)
and
channels
(24)
and
(25)
(TM 1-1500-204-23).
(4) Remove endplates (22) and (23) from chan-
nels (24) and (25).
e. Remove channels (24) and (25).
(1) Remove channel (24) from vane shafts (2)
and (14).
(2) Remove washer (29) from shaft (2).
(3) Remove washers (29) from six shafts (14).
(4) Remove and discard seven push-on nuts (30)
from louver channel (25).
(5) Remove channel (25) from vane shafts (2)
and (17).
(6) Remove washer (31) from shaft (2).
(7) Remove washers (31) from six shafts (14).
(8) Remove louver vane (32) and six louver
vanes (33).
GO TO NEXT PAGE
M04-3374-3
23
31
17
29
26
26
31
32
2
29
27
30
25
27
22
24
28
33
28
