TM 1-1520-238-23
4-221
4.68.
NO. 1 OR NO. 2 ANTI-ICE VALVE AND BRACKET REMOVAL/INSTALLATION – continued
c. For engine No. 1, detach connector P33 (1)
from engine inlet anti-ice valve receptacle L1
(2).
d. For engine No. 2, detach connector P34 (3)
from engine inlet anti-ice valve receptacle L2
(4).
e. For engine No. 2, remove wire harness sup-
port clamp (5) from engine inlet anti-ice valve
(6).
(1) Hold screw (7). Remove nut (8) and washer
(9).
(2) Remove screw (7) from clamp (5) and clip
(10).
f. Remove tube (11) from valve (6).
(1) Hold union (12). Use crowfoot.
(2) Remove nut (13). Use crowfoot.
g. Remove tube (14) from valve (6).
(1) Hold fitting (15). Use crowfoot.
(2) Remove nut (16). Use crowfoot.
h. Remove union (12) from valve (6).
(1) Hold valve (6). Use crowfoot.
(2) Remove union (12). Use crowfoot.
(3) Remove and discard packing (17).
i. Remove valve (6) from engine inlet anti-ice
valve support (18).
(1) Hold two screws (19). Remove two nuts (20)
and washers (21).
(2) Remove two screws (19) and washers (22).
GO TO NEXT PAGE
1
2
16
14
15
6
11
13
12
FOR ENGINE NO.1
M04-1041-2
6
5
16
14
15
4
3
13
11
7
5
6
89
10
M04-1041-9
12
FOR ENGINE NO. 2
12
17
6
M04-1041-4
18
21
22
19
6
20
M04-1041-3
