TM 1-1520-238-23
4-413
4.130.
NO. 1 AND NO. 2 ENGINE SECONDARY NOZZLE HORIZONTAL HEAT SHIELD AND SHIELD
PANEL REMOVAL/INSTALLATION – continued
NOTE
Observe container for sealant cure time.
(4) Allow sealant to cure.
(5) Remove two screws (2) and washers (3) from
nozzle (5).
c. Install upper or lower shield (1).
(1) Slide shield (1) onto nozzle (5).
(2) Install eight screws (2) and washers (3)
through support (4) and nozzle (5).
d. Inspect (QA).
e. Install outboard or center nozzle vertical heat
shield (para 4.129).
f. Install inboard nozzle heat shield (para 4.131).
g. Install No. 1 or No. 2 engine outboard secon-
dary nozzle (para 4.120).
h. Install No. 1 or No. 2 engine inboard secon-
dary nozzle (para 4.121).
i. Install No. 1 or No. 2 engine center secondary
nozzle (para 4.122).
END OF TASK
5
2
3
M04-2619-6
1
4
3
M04-2619-7
5
2
