TM 1-1520-238-23
4-408
4.129.
NO. 1 AND NO. 2 ENGINE OUTBOARD AND CENTER SECONDARY NOZZLE VERTICAL HEAT
SHIELD AND SUPPORT BRACKET REMOVAL/INSTALLATION continued
b. Remove shield support bracket (9).
(1) Remove two screws (11) and washers (12)
from bracket (9) and nozzle (6).
c. Remove and discard insulation (13).
4.129.4. Cleaning
a. Clean outside of shields, nozzle, and bracke
(para 1.47).
4.129.5. Inspection
a. Check shields, nozzle, and bracket for
stripped, bent, or loose nutplates. None al-
lowed.
b. Check shields, nozzle, and bracket for corro-
sion (para 1.49).
c. Check shields, nozzle, and bracket for cracks.
None allowed.
4.129.6. Repair
a. Repair nutplate damage by replacing defec-
tive nutplates.
(1) Coat mounting surface of new nutplates be-
ing installed. Use epoxy primer coating kit
(item 78, App F).
(2) Allow coated areas to cure 1 HOUR.
(3) Install new nutplates (TM 1-1500-204-23).
GO TO NEXT PAGE
M04-2618-3
9
13
12
11
6