TM 1-1520-238-23
4-695
4.188.
PILOT POWER QUADRANT LIGHT INDICATING PANEL REMOVAL/INSTALLATION – continued
(2) Lift panel (5) from quadrant (3) and turn 90
degrees.
(3) Aline slot (7) in panel (5) with handles (4).
(4) Remove panel (5).
4.188.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
4.188.5. Inspection
a. Check panel for cracks. None allowed.
b. Check indicating panel connector and con-
nector on power quadrant for damage. None
allowed.
c. Check panel for corrosion (para 1.49).
4.188.6. Installation
a. Install panel (5) on power quadrant (3).
(1) Aline slot (7) in panel (5) with handles (4).
(2) Lower panel (5) over handles (4).
(3) Aline panel (5) with quadrant (3).
(4) Press panel (5) on quadrant (3).
NOTE
Ensure electrical connector on light panel
mates with electrical connector on power
quadrant.
(5) Install four screws (6).
b. On quadrant (3), move No. 1 and No. 2 handles
(4) to OFF.
GO TO NEXT PAGE
M04-2020-3
5
7
3
4
M04-2020-4
4
5
7
3
M04-2020-5
6
4
3
