TM 1-1520-238-23
5-118
Change 1
5.24.
MAIN ROTOR DAMPER ROD END REMOVAL/INSTALLATION – continued
5.24.3. Removal
NOTE
Count the visible threads showing on the
threaded portion of the main rotor rod
end. Use this information during installa-
tion procedures.
a. Remove main rotor damper rod end (1) from
lead lag link (2).
(1) Remove sealing compound from attaching
hardware. Use spatula set.
(2) Hold bolt (3). Use box wrench.
(3) Remove nut (4) and washer (5). Use ratchet.
(4) Discard nut (4).
(5) Remove bolt (3), angle bracket (6), and
sleeve bushing (7).
(6) Swing rod end (1) free from link (2) and re-
move washer (8).
b. Remove rod end (1) from damper (9).
(1) Remove lockwire from nut (10) and key
washer (11).
(2) Loosen nut (10).
(3) Remove rod end (1) from damper (9). Use
crowfoot.
(4) Remove key washer (11), washer (12), and
nut (10) from rod end (1).
GO TO NEXT PAGE
M04-218-2
6
2
5
4
8
3
7
1
M04-218-3
1
10
12
11
9
