TM 1-1520-238-23
Change 9
6-12.3
6.1A.
AFT HANGER BEARING ASSEMBLY/DISASSEMBLY continued
(1) Remove self-locking nut (1), pilot (2), input flange (3) and bearing spacer (4) from hanger bearing
subassembly (5). Use 1/2 inch breaker bar attached to nutation tool as torque reactor.
(2) Remove six bolts (6), self-locking nuts (7), and 12 washers (8) from two bearing retainers (9).
(3) Discard old self-locking nut (1).
(4) Remove and tag spacer shims (10).
GO TO NEXT PAGE