TM 1-1520-238-23
7-401
7.107.
TAIL WHEEL LOCK CONTROL VALVE REPLACEMENT – continued
7.107.3. Removal
a. Detach connector P754 (1) from receptacle
(HP5)J1 (2).
b. Remove tube (3) from control valve (4).
(1) Hold union (5). Remove nut (6).
c. Remove tube (7) from valve (4).
(1) Hold union (8). Remove nut (9).
d. Remove tube (10) from valve (4).
(1) Hold check valve (11). Remove nut (12).
e. Remove valve (4) from deck (13).
(1) Remove two screws (14) and washers (15)
from two clamps (16).
(2) Remove valve (4) from deck (13).
(3) Slide two clamps (16) from valve (4).
f. Remove unions (5) and (8) from valve (4).
(1) Remove unions (5) and (8).
(2) Remove and discard packings (17) and (18).
g. Remove check valve (11) from valve (4).
(1) Remove and discard check valve (11) and
packing (19).
GO TO NEXT PAGE
M04-914-2
6
5
4
2
1
10
12
11
8
9
7
3
16
M04-914-3
16
4
13
15
14
M04-914-4
18
8
19
11
4
17
5
