TM 1-1520-238-23
7-403
7.107.
TAIL WHEEL LOCK CONTROL VALVE REPLACEMENT – continued
d. Install valve (4) on deck (13).
(1) Slide two clamps (16) on valve (4).
(2) Position valve (4) on deck (13).
(3) Install two screws (14) and washers (15)
through two clamps (16).
e. Install tube (10) on valve (4).
(1) Lubricate threads of check valve (11). Use
clean hydraulic fluid (item 92, App F).
(2) Hold check valve (11). Install nut (12).
f. Install tube (7) on valve (4).
(1) Lubricate threads of union (8). Use clean
hydraulic fluid (item 92, App F).
(2) Hold union (8). Install nut (9).
g. Install tube (3) on valve (4).
(1) Lubricate threads of union (5). Use clean
hydraulic fluid (item 92, App F).
(2) Hold union (5). Install nut (6).
h. Attach connector P754 (1) to receptacle
(HP5)J1 (2).
i. Inspect (QA).
j. Bleed utility hydraulic system (para 1.35).
k. Service utility hydraulic system (para 1.34).
l. Perform utility hydraulic system maintenance
operational check (TM 1-1520-238-T).
m. Install access fairings L510 and R510 (para
2.2).
END OF TASK
14
4
16
16
M04-914-6
13
14
15
15
7
5
6
10
1
M04-914-7
4
2
12
3
11
8
9
