TM 1-1520-238-23
7-496
7.129.
SDC AIR INLET DUCT REMOVAL – continued
7.129.3. Removal
a. Remove housing (1) from inlet duct (2).
(1) Loosen retainer clamp (3).
(2) Slide housing (1) until clear of duct (2).
b. Remove interconnect hose (4) and surge
valve pressure hose (5) from unions (6) and
(7).
(1) Hold union (6). Remove nut (8).
(2) Hold union (7). Remove nut (9).
c. Remove hose (10) from duct (2).
(1) Loosen clamp (11). Remove hose (10).
d. Remove vent tube (12) from duct (2) and union
(6).
(1) Remove nut (13), washer (14), screw (15)
and clamp (16) from duct (2).
(2) Hold union (6). Remove nut (17).
e. Remove pressure tube (18) from tee (19).
(1) Hold tee (19). Remove nut (20).
f. Remove tube (21) from union (7) and tee (19).
(1) Hold union (7). Remove nut (23).
(2) Hold tee (19). Remove nut (24).
g. Remove manifold tube (25) from tee (19).
(1) Hold tee (19). Remove nut (26).
GO TO NEXT PAGE
6
8
4
7
9
5
11
10
2
3
1
M04-064-2
M04-064-7
20
18
19
26
25
2
17
6
23
21
15
12
16
14
13
7
24
