TM 1-1520-238-23
Change 4
6-135
6.28.
ENGINE NOSE GEARBOX OIL TEMPERATURE TRANSDUCER
REMOVAL/INSTALLATION continued
c. Cut wires (1) to length.
d. Pin wires (1) to P61 (NGB 1) or P60 (NGB 2) or
attach wires (1) to soft splices (2)
(TM 55-1500-323-24).
(1) For No. 1 engine nose gearbox oil tempera-
ture transducer (3), pin wires as follows:
(a) Red wire to P61-F.
(b) Blue (unshielded) wire to P61-G.
(c) Yellow wire to P61-H.
(d) Blue (shielded) wire to P61-J.
(2) For No. 2 engine nose gearbox oil tempera-
ture transducer (3), pin wires as follows:
(a) Red wire to P60-F.
(b) Blue (unshielded) wire to P60-G.
(c) Yellow wire to P60-H.
(d) Blue (shielded) wire to P60-J.
e. Inspect (QA).
f. Service engine nose gearbox (para 1.28).
g. Install engine nose gearbox fairings and
shrouds (para 2.123).
h. Perform drive system dynamic maintenance
operational check (TM 1-1520-238-T).
END OF TASK
M04-541-4B
1
1
3
2