TM 1-1520-238-23
Change 1
6-221
6.46.
MAIN TRANSMISSION CHIP DETECTOR REPLACEMENT – continued
c. Install probe (13).
(1) Lubricate and install new packing (15) on
probe (13). Use petrolatum (item 138,
App F).
(2) Install probe (13) in base (14).
(3) Push probe (13) in and turn 90 degrees clock-
wise to lock.
d. Pin three right detector wires (1) in splices (2)
(TM 55-1500-323-24).
(1) Cut three probe wires (1) to proper length.
(2) Install three contacts (23) on wires (1).
(3) Identify and attach three probe wires (1) in
splices (2).
(a) Insert white wire into S-17 SP1 (lead for
J755-17).
(b) Insert red wire into S-17 SP2 (lead for
J755-18).
(c) Insert black wire into S-17 SP3 (lead for
J755-19).
e. Install clamp (5) on wires (1).
(1) Position clamp (5) on wires (1).
(2) Install screw (3) through washer (4), clamp
(5), and bracket (6).
GO TO NEXT PAGE
14
15
13
M04-471-10
M04-471-14
1
43
2
6
23
5
