TM 1-1520-238-23
6-222
Change 2
6.46.
MAIN TRANSMISSION CHIP DETECTOR REPLACEMENT – continued
f. Pin three left detector wires (7) in receptacle
(8) (TM 55-1500-323-24).
(1) Cut three probe wires (7) to proper length.
(2) Install three contacts (24) on wires (7).
(3) Connect probe wires (7) to receptacle (8).
(a) Insert black wire into J755-27.
(b) Insert red wire into J755-28.
(c) Insert white wire into J755-29.
g. Install two clamps (10) on wires (7).
(1) Position two clamps (10) on wires (7).
(2) Install two screws (11) through washers (12),
clamps (10), and lugs (25).
h. Attach connector P755 (9) to receptacle
W110J755 (8).
i. Inspect (QA).
j. Service main transmission oil system (para
1.32).
k. Perform drive system dynamic maintenance
operational check (TM 1-1520-238-T).
END OF TASK
9
M04-471-11
12
7
11
25
10
24
24
12
8
24
