TM 1-1520-238-23
Change 6
6-313
6.70.
MAIN TRANSMISSION ACCESSORY PUMP FILTER BOWL, ELEMENT, AND PRESSURE
INDICATOR REMOVAL/INSTALLATION – continued
6.70.6. Installation
a. Install indicator (22) in bowl (13).
(1) Lubricate new packing (25). Use petrolatum
(item 138, App F).
(2) Install packing (25) on indicator (22).
(3) Install indicator (22) in bowl (13).
(4) Install wafer ring (24) on bowl (13).
(5) Install snap ring (23) on bowl (13).
b. Install bypass screen (16) in filter head (5).
Torque plug (17) to 100 INCH-POUNDS.
(1) Install bypass screen (16) in head (5) until
filter is seated. Use bypass filter removal tool
(21) (figure D-460, App D).
(2) Lubricate new packing (20). Use petrolatum
(item 138, App F).
(3) Install packing (20) on plug (17).
(4) Install poppet (19), spring (18), and plug (17) in
head (5).
(5) Torque plug (17) to 100 INCH-POUNDS. Use
torque wrench.
(6) Lockwire plug (17) to head (5). Use wire
(item 227, App F).
GO TO NEXT PAGE
22
23
24
25
13
M04-3646-6
M04-3646-11
5
16
21
M04-3646-9A
5
17
20
19
16
18
