TM 1-1520-238-23
6-317
6.71.
MAIN TRANSMISSION ACCESSORY DRIVE LUBE PUMP REMOVAL/INSTALLATION
(AVIM) – continued
6.71.3. Removal
a. Remove lube pump (1) from accessory drive
cover (2).
(1) Remove four bolts (3) and washers (4).
(2) Install AN104736 bolt (5) three turns in center
of pump (1).
(3) Pull bolt (5) to remove pump (1) from cover
(2).
(4) Remove bolt (5) from pump (1).
(5) Remove and discard packing (6).
b. Remove two oil transfer tubes (7) from cover
(2).
(1) Pull two tubes (7) out of cover (2).
(2) Remove and discard four packings (8).
GO TO NEXT PAGE
M04-2009-1
2
3
4
1
M04-2009-4
M04-2009-2
1
5
5
1
6
7
8
2
