TM 1-1520-238-23
6-385
6.88.
QUILL HOUSING/HYDRAULIC PUMP SEAL DRAIN TUBE REMOVAL/INSTALLATION – continued
6.88.3. Removal
a. Remove quill housing drain tube (1).
(1) Loosen two clamps (2).
(2) Remove quill tube (1).
(3) Remove two clamps (2) from quill tube (1).
b. Remove clamp (3) from main transmission re-
turn oil line (left side).
(1) Remove bolt (4) and washer (5).
(2) Remove clamp (3) and spacer (6).
c. Remove tube (7) from tee (8).
(1) Hold tee (8). Remove nut (9).
d. Remove hydraulic pump seal drain tube (10).
(1) Hold union (11). Remove nut (12).
(2) Hold tee (8). Remove nut (13).
e. Remove drain tube lower section (14).
(1) Remove screw (15) and spacer (16) from
lower clamp (17) and clip (18).
(2) Remove screw (19) and clamp (20) from up-
per clip (21).
(3) Hold tee (8). Remove nut (22).
(4) Remove drain tube (14) from grommet (23).
(5) Remove clamps (17) and (20) from drain tube
(14).
GO TO NEXT PAGE
1
2
12
11
10
7
21
8
13
9
10
3
4
3
6
M04-2300-2
5
M04-2300-3
8
22
14
14
19
2021
14
15
23
17
18
16
