TM 1-1520-238-23
Change 1
6-467
6.109.
TRANSMISSION INSTALLATION – INSTALL TRANSMISSION – continued
CAUTION
Allow bolts to air dry for 30 MINUTES
after coating with lubricant. Damage to
aircraft could occur.
h. Install mounting bolts (11), (12), (13), (14), and
(15). Torque mounting bolts (11), (12), (13), (14),
and (15) to 260 INCH-POUNDS.
(1) Lubricate bolt threads. Use lubricant
(item 114, App F).
(2) Allow bolts to air dry for 30 MINUTES after
coating with lubricant.
(3) Aline five washers (16) over holes in base (5).
(4) Install mounting bolts (11), (12), (13), (14),
and (15) through five washers (16) in base
(5).
NOTE
Torque bolts in following order: (11), (13),
(12), (14), and (15).
(5) Torque mounting bolts (11), (12), (13), (14),
and (15) to 260 INCH-POUNDS. Use torque
wrench.
i. Inspect (QA).
j. Remove three jackscrews (7) and washers (8).
GO TO NEXT PAGE
16
11
M04-2969-5
12
14
15
16
16
13
5
M04-2969-6
8
7
8
7
8
7
