TM 1-1520-238-23
7-66
7.18.
PRIMARY HYDRAULIC MANIFOLD RESERVOIR SEAL REPLACEMENT (AVIM) – continued
e. Install guard (5) on housing (1). Torque three
screws (6) to 14 INCH-POUNDS.
(1) Lubricate new channel seal (12) and new
packing (13). Use clean hydraulic fluid
(item 92, App F).
(2) Install packing (13) in groove of channel seal
(12).
(3) Slide channel seal (12) over end of piston (7)
protruding from housing (1).
(4) Push seal (12) into housing (1) using guard
(5).
(5) Install three screws (6). Torque three screws
(6) to 14 INCH-POUNDS. Use hexagon
screwdriver and torque wrench.
(6) Lockwire screws (6) together. Use wire
(item 222, App F).
f. Install housing (1) on manifold (2). Torque four
bolts (3) to 60 INCH-POUNDS.
(1) Install and torque four bolts (3) to 60 INCH-
POUNDS. Use torque wrench.
(2) Lockwire bolts (3) in pairs. Use wire
(item 222, App F).
g. Inspect (QA).
GO TO NEXT PAGE
6
5
1
M04-3060-8
13
12
7
2
3
1
M04-3060-9
