TM 1-1520-238-23
7-70
7.19.
PRIMARY HYDRAULIC MANIFOLD DRAIN HOSE REPLACEMENT – continued
7.19.3. Removal
a. Remove hose (1) from tube (2).
(1) Loosen and remove clamp (3).
b. Remove two clamps (4) from bracket (5).
(1) Hold screw (6). Remove nut (7).
(2) Remove screw (6), washer (8), two clamps
(4), and spacer (9) from bracket (5).
c. Remove clamp (10) from bracket (11) (three
places).
(1) Hold screw (12). Remove nut (13) and wash-
er (14).
(2) Remove screw (12) and clamp (10).
d. Remove and discard hose (1) from grommet
(15).
7.19.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
7.19.5. Inspection
a. Check grommet for deterioration. None al-
lowed.
b. Check removed and attaching parts for corro-
sion (para 1.49).
7.19.6. Installation
a. Install clamp (3) on new hose (1).
(1) Position clamp (3) over hose (1).
(2) Slide hose (1) over tube (2).
(3) Tighten clamp (3) around hose (1) and tube
(2).
GO TO NEXT PAGE
M04-3339-3
M04-3339-4
7
5
9
4
8
6
4
2
3
1
10
15
M04-3339-5
11
14
12
13
10
