TM 1-1520-238-23
Change 5
7-171
7.44.
LATERAL SERVOCYLINDER REMOVAL – continued
v. Remove rod end (34) from control arm (35).
(1) Remove and discard cotter pin (36).
(2) Hold bolt (37). Remove nut (38).
(3) Remove bolt (37).
WARNING
To prevent movement of bellcrank and
possible injury, support bellcrank be-
fore disconnecting servocylinder. If
injury occurs, seek medical aid.
w. Remove rod end (39) from bellcrank (40).
(1) Remove sealant from attaching hardware
(para 1.47).
(2) Remove and discard cotter pin (41).
(3) Hold self-retaining bolt (42). Use box wrench.
(4) Remove nut (43). Use box wrench.
(5) Remove bolt (42) and washer(s) (42.1), if
installed.
NOTE
Do not remove nylon washer unless it is
loose or excessively worn.
(6) Remove bushing (44) and nylon washer (45)
(if necessary).
x. Remove servocylinder (9) from bellcrank (40).
GO TO NEXT PAGE
34
36
38
37
35
M04-809-7
M04-809-9A
42
40
39
41
43
42.1
M04-809-10A
40
39
9
45
44
