TM 1-1520-238-23
7-176
7.45.
LATERAL SERVOCYLINDER INSTALLATION – continued
b. Install servocylinder (3) on bracket (5).
(1) One person hold upper end of servocylinder
and second person lift lower end. Position
servocylinder (3) on bracket (5).
(2) Install pin (6).
CAUTION
Improper installation of self-retaining bolt
will damage bolt and pin.
c. Install self-retaining bolt (7) in pin (6).
(1) Install bolt (7) in pin (6).
(2) Press button (8) in center of bolt (7).
(3) Screw bolt (7) into pin (6) as far as possible
before releasing button (8).
d. Torque bolt (7) 50 to 70 INCH-POUNDS.
(1) Hold pin (6). Use box wrench.
(2) Torque bolt (7) to 50 INCH-POUNDS. Use
crowfoot and torque wrench.
(3) Increase torque to aline cotter pin hole, but do
not exceed 70 INCH-POUNDS.
(4) Install new cotter pin (9).
GO TO NEXT PAGE
M04-810-12
8
5
3
7
9
6
M04-810-13
6
9
7
