TM 1-1520-238-23
7-298
7.74.
UTILITY HYDRAULIC MANIFOLD RESERVOIR SEAL REPLACEMENT (AVIM) – continued
7.74.3. Removal
a. Remove reservoir housing (1) from manifold
(2).
(1) Remove lockwire. Remove six bolts (3).
(2) Hold two nuts (4). Remove two long bolts (5).
(3) Remove housing (1) from manifold (2).
(4) Remove and discard packing (6).
b. Remove guard (7) from housing (1).
(1) Remove lockwire. Remove three screws (8).
Use hexagon screwdriver.
c. Remove piston (9) from housing (1).
(1) Remove and discard two packings (10) and
(11) from piston (9).
d. Remove and discard relief valve (12) and re-
tainer (13) from end of piston rod (9).
GO TO NEXT PAGE
1
5
4
2
6
M04-3061-1
3
1
8
7
M04-3061-2
1
M04-3061-3
11
9
10
12
13
9
M04-3061-15
