TM 1-1520-238-23
9-184
9.53.
PILOT INSTRUMENT PANEL MATRIX FIXED RESISTOR REPLACEMENT – continued
9.53.6. Installation
a. Install resistor (2) on matrix panel (3).
(1) Position resistor (2) on panel (3).
(2) Install two screws (4) and washers (5).
WARNING
Soldering iron can cause severe
burns to personnel and start fires.
Observe all safety precautions when
using soldering iron. If injury occurs,
seek medical aid.
b. Solder identified wires (1) to new resistor (2).
(1) Install sleeving over two identified wires (1).
Use insulation sleeving (item 103, App F)
(2) Solder wires (1) to resistor (2). Use soldering
iron
and
solder
(item 189, App F)
(TM 55-1500-323-24).
(3) Secure sleeving to wires (1). Use tape
(item 202, App F) (TM 55-1500-323-24).
c. Inspect (QA).
d. Install pilot instrument panel matrix assembly
(para 9.51).
END OF TASK
M04-3686-3
2
3
4
5
2
3
1
M04-3686-4
