TM 1-1520-238-23
9-426
9.116.
CPG CAUTION/WARNING PANEL HOUSING DISASSEMBLY/ASSEMBLY (AVIM) – continued
NOTE
Do not desolder wires from coil (A157)L1
unless replacing coil.
i. Remove coil (A157)L1 (30) from housing (2).
(1) Hold screw (31). Remove nut (32) and wash-
ers (33) and (34).
(2) Remove screw (31) from housing (2).
(3) Remove coil (30).
j. Remove plate (5) from housing (2).
(1) Remove six screws (35) from housing (2).
(2) Remove six screws (36) from housing (2).
(3) Remove plate (5).
NOTE
Do not depin wires from connectors
(A157)J3, (A157)J4, or (A157)J5 unless
replacing connectors.
k. Remove connectors (A157)J3 (37), (A157)J4 (38),
and (A157)J5 (39) from plate (5).
(1) Remove six screws (40), washers (41), and
nuts (42) from connectors (A157)J3 (37),
(A157)J4 (38), and (A157)J5 (39).
(2) Remove connectors (A157)J3 (37), (A157)J4
(38), and (A157)J5 (39) by sliding each connec-
tor through plate (5) connector slot.
GO TO NEXT PAGE
M04-4221-10
31
30
34
33
32
2
M04-4221-11
5
2
36
35
M04-4221-12
5
40
41
42
39
38
37
