TM 1-1520-238-23
9-576
9.152.
AIR TURBINE STARTER FLOW SWITCH AND TURBINE SPEED CUTOUT FLOW SWITCH
REPLACEMENT continued
9.152.6. Installation
NOTE
Installation of air turbine starter flow
switch requires attaching connector P64
to connector (A5)J1 and/or installation of
the turbine speed cutout flow switch re-
quires attaching connector P1370 to
(A709)J1.
a. Install switch (3).
(1) Install two washers (5) and screws (4).
b. Attach connector P64 (1) to receptacle (A5)J1
(2) or connector P1370 (1) to receptacle
(A709)J1 (2).
c. Perform
electrical
bond
check
(TM 55-1500-323-24).
(1) Bond shall be 0.0025 OHM or less. Use
ohmmeter.
d. Inspect (QA).
e. Install access panel L200 (para 2.2).
f. Perform power plants maintenance operation-
al check (engine 1 or engine 2)
(TM 1-1520-238-T).
END OF TASK
M04-1817-4
2
3
1
5
4